Full Tilt Boogie Racing's
Black Friday
Small Business Saturday
Cyber Monday Sale!

All items On This Page Include
Up to a 30% Discount and
Free Domestic Shipping!
Sale good thru Monday, November 28th.
SN-95 Suspension
and Brake Parts
1999 thru 2004 Mustang
(click here)
S-197 Suspension
and Brake Parts
2005 thru 2014 Mustang
(click here)
S550 Suspension
and Brake Parts
2015 thru 2018 Mustang
(click here)
FORD Focus
RS Parts
(click here)
FORD Focus
ST Parts
(click here)


SN-95 Parts
FT 1000 FT 1050  FTBR Eccentric camber adjusting bolt
Delrin Upper control arm bushings
and Hardcoated inner sleeves.
IRS Eccentric Camber
Adjusting Bolt.
2 required per vehicle
FT 1000 $139.00   $125.10 FT 1050 $19.95   $17.95
FT 1100
Delrin Lower control arm bushings
and Hardcoated inner sleeves
with shimming washers.
FTBR
Front Differential Torque Brace.
Gloss Black Powder coated.
FT 1100 $329.00   $296.10 FT 1291 $145.95   $131.36
FT 1200 FT 1300
Aluminum Front Differential Supports
with Aluminum shimming washers
to set pinion angle.
99-04 Mustang Cobra
Delrin Rear Differential Support.
99-04 Mustang Cobra

* Note: Be sure to replace
both the Front and Rear differential
supports at the same time.
FT 1200 $99.00   $89.10 FT 1300 $54.00   $48.60
Delrin Isolated Rear Differential
Lowering Mount.
Comes complete with the
Delrin bushings installed.
99-04 Mustang Cobra
FT 1401 $179.00   $161.10
FT 1500 FT 1515
UHMW IRS Subframe
support kit.
99-04 Mustang Cobra
Oversize
UHMW IRS Subframe
support kit.
Use when the outer metal sleeve
has been removed.
99-04 Mustang Cobra
FT 1500 $139.00   $125.10 FT 1515 $159.00   $143.10
FT 1600
One pair of Grade 8, 9/16" bolts
with nylock nuts and flat washers for the
front subframe mounts.

99-04 Mustang Cobra
SN-95 IRS Rear Subframe
Low Profile Hex Bolt Kit.
99-04 Mustang Cobra
FT 1600 $19.95   $17.96 FT 1650 $27.55   $24.71
 
SN-95 IRS Lower Control Arm
Bolt Kit.
SN-95 IRS Upper Control Arm
Bolt Kit.
SN-95 IRS Rear Subframe
Mounting Bracket Bolt Kit.
FT 1660 $45.00   $40.50 FT 1670 $17.00   $15.30 FT 1680 $16.00   $14.40
 
Knuckle Hardware Kit.
(Hardware for one knuckle)
FT 6806 $56.75   $51.10
 
FT 1700
Combination UCA and LCA bushing
grease fitting kit.
FT 1700 $27.50   $24.75
FT 1860 FT 1900 FT 2100
Deluxe Bumpsteer/
Upgraded Toe Link Kit.
(replaces all OEM toe link components)
99-04 Mustang Cobra
Adjustable sway bar end link kit.
99-04 Mustang Cobra
OEM IRS Bushing
removal/installation kit.*
WITH BUSHING KIT PURCHASE
($50 Refunded when returned)
(Return anytime, No time limit)
FT 1860 $264.00   $242.10 FT 1900 $55.00   $49.50 FT 2100 $89.00   $80.10
Combo Deal: SAVE $$$!

Purchase the FT 1350M, Milled Ford Racing Reinforced IRS Rear Differential Cover and the
FT 5001, Complete IRS Bushing Kit with the Delrin Isolated Rear Differential Lowering Mount
together and save $$$!
FT 1350M and FT 5001 $1,205.00  $1,114.50
FT 5000
Complete IRS Bushing Kit. Complete IRS Bushing Kit
with delrin isolated rear diff
lowering mount.
FT 5000 $789.00   $710.10 FT 5001 $895.00   $805.50
FT 6106 FT 6110 FT 6100
Cross Axis Joint
Replacement Boot.
FIT OEM JOINTS ONLY
99-04 Mustang Cobra
Cross Axis Joint Removal/Installation
tool set.
99-04 Mustang Cobra
Cross Axis Joint
for Rear Knuckle.
99-04 Mustang Cobra
These will NOT fit the 1999 Cobra
recalled knuckle assemblies!
FT 6106 $7.00   $6.30 FT 6110 $30.00   $27.00 FT 6100 $67.50   $60.75
FT 6120 FT 6150 FT 6170
SET OF 4
Cross Axis Joints with the
Removal/Installation tool set.

99-04 Mustang Cobra
These will NOT fit the 1999 Cobra
recalled knuckle assemblies!
Cross Axis Joint
with protective boot
for Rear Knuckle.

99-04 Mustang Cobra
These will NOT fit the 1999 Cobra
recalled knuckle assemblies!
SET OF 4
Cross Axis Joints with
protective boots including the Removal/Installation tool set.

99-04 Mustang Cobra
These will NOT fit the 1999 Cobra
recalled knuckle assemblies!
FT 6120 $295.00 $265.50 FT 6150 $85.00  $76.50 FT 6170 $339.00  $305.10
FT 1370 - Rear Diff Cooler Kit
Rear differential cooler kit.
Kit includes a heat exchanger/fan assembly with -8 fittings,
Tilton oil pump,
15 feet of -8 stainless braided line,
three 90 degree -8 fittings,
seven straight -8 fittings,
one 90 degree swivel for the suction line,
one AN-8 check valve,
one 280 degree temperature gauge with sending unit.
FT 1370 $985.00   $886.50
 
Our hubs are currently on backorder.
These will ship as soon as we receive delivery from our supplier.
Sorry for the inconvenience.

Currently on backorder.

Currently on backorder.

Currently on backorder.
FTBR SN-95 Cobra IRS
Rear Hub.
Clear Zinc Plated.
99-04 Mustang Cobra
FTBR SN-95 Cobra IRS
Rear Hub with
2.5" studs installed.
Clear Zinc Plated.
99-04 Mustang Cobra
FTBR SN-95 Cobra IRS
Rear Hub with
3" ARP studs installed.
Clear Zinc Plated.
99-04 Mustang Cobra
FT 6555 $119.95  $107.96 FT 6556 $154.95  $139.46 FT 6557 $189.95  $170.96
FT 6570   FT 9000

Choose the Thickness
Hubcentric spacers.
"EXTENDED STUDS REQUIRED"
Rear only!
  Fixed Caliper Piston
Compressing Tool for
4 piston Brembo calipers.
FT 6570 $179.95  $161.96   FT 9000 $15.00  $13.50
SN-95 13" IRS, Bullitt and Mach 1
Rear Brake Conversion Kit
2 piece - Bolt together
Slotted, Directionally vaned, Zinc Plated.
SN-95 13" IRS, Bullitt and Mach 1
Rear Brake Conversion
Replacement Rotor Ring Set
Slotted, Directionally vaned, Zinc Plated.
FT 7000A $834.00   $750.60 FT 7000A Ring Set $335.00   $301.50
SN-95 13" IRS, Bullitt and Mach 1
Rear Brake Conversion Kit
2 piece - Floating
Slotted, Directionally vaned, Zinc Plated.
SN-95 13" IRS, Bullitt and Mach 1
Rear Brake Conversion Replacement
Floating Rotor Ring Set.
Slotted, Directionally vaned, Zinc Plated.
FT 7050 $1,080.00   $972.00 FT 7050 Ring Set $434.00   $390.60
SN-95 Brake Cooling Ducts. (Pair)
(The duct openings are oval in shape and configured to direct air flow to the center of the rotor and not on the inside face.)
These will not fit the 94-95 spindles.
SN-95 Brake Cooling Duct Kit
with 10' long
Neoprene hose.
These will not fit the 94-95 spindles.
SN-95 Brake Cooling Duct Kit
with 10' long
Thermoplastic Rubber hose.
These will not fit the 94-95 spindles.
FT 9295 $159.00  $143.10 FT9295N Kit $254.00  $228.60 FT 9295R Kit $209.95  $188.96


S-197 Parts
FT 6570

Choose the Thickness
Hubcentric spacers.

"EXTENDED STUDS REQUIRED"
FT 6570 $179.95   $161.96
FT 905
S-197 Front Hubcentric spacers.
.750 thick
"EXTENDED STUDS REQUIRED"
S-197 Lower Control Arm Kit.
FT 6572 $299.00   $269.10 FT 905 $329.00   $296.10
 
FT 905 FT 960
S-197 Lower Control Arm Kit.
2013/2014 Shelby only.
S-197 Front adjustable
sway bar end link kit.
FT 905S $329.00   $296.10 FT 960 $239.00   $215.10
 
FT 1370 - Rear Diff Cooler Kit
Rear differential cooler kit.
Kit includes a heat exchanger/fan assembly with -8 fittings,
Tilton oil pump,
15 feet of -8 stainless braided line,
three 90 degree -8 fittings,
seven straight -8 fittings,
one 90 degree swivel for the suction line,
one AN-8 check valve,
one 280 degree temperature gauge with sending unit.
FT 1370 $985.00     $886.50
 
FT 9000 FT 9200....S-197 FRONT BRAKE COOLING DUCTS
Fixed Caliper Piston Compressing Tool
for 4 piston Brembo calipers.
S-197 Front Brake Cooling Ducts.
(Pair)
FT 9000 $15.00   $13.50 FT 9200 $159.00   $143.10
 
S-197 Complete 13" Rear Brake Conversion Kit S-197 13" Rear Brake Conversion Replacement Rotor Ring Set
S-197 13" Rear Brake Conversion Kit
Two Piece Floating Rotors
Slotted, Directionally vaned, Zinc Plated.
S-197 13" Rear Brake Conversion
Replacement Floating Rotor Ring Set
Slotted, Directionally vaned, Zinc Plated.
FT 9600 $1,025.00   $922.50 FT 9600 Ring Set $379.00   $341.10
FT 9755
Shelby GT350 15.5 inch
Front Brake Conversion Caliper Brackets
for S-197 Mustangs.
The custom FT 9755D Brake Lines are
required for the brake conversion.
FT 9755B $299.50     $269.55
 


S550 Parts
FT 530 
S550 Subframe Bushing Kit.
FT 530 $249.00   $224.10

FT 548 - S550 Knuckle Spherical Bearing Assy

Currently on backorder.
S550 Knuckle to Toe Link
Spherical Bearing Assembly.
FT 548 $178.00   $160.20
FT 552 - S550 LCA Spherical Bearing Assy

Currently on backorder.
S550 Lower Control Arm
Spherical Bearing Assembly.
S550 FRONT Lower Control Arm
Spherical Bearing Assembly.
FT 552 $249.00   $224.10 FT 556 $249.00   $224.10
FT 550
S550 Adjustable Vertical Link. S550 Adjustable Toe Link.
FT 550 $375.00   $337.50 FT 555 $329.00   $296.10
FT 560
Front adjustable
sway bar end link kit.
Rear adjustable
sway bar end link kit.
FT 560 $239.00   $215.10 FT 565 $149.00   $134.10
FT 590 - S550 Shifter reinforcement bracket FT 594 FT 2200
S550 Shifter Reinforcement Bracket Kit.
GT's only!
S550 Shifter Reinforcement Bracket Kit.
Ecoboost only!
S550 IRS Bushing
Removal/Installation
Tool Set.
FT 590 $82.50   $74.25 FT 594 $82.50   $75.25 FT 2200 $60.00   $54.00
FT 571 - GT350 Caliper Brackets FT 595
GT350R
Caliper Mounting Brackets.
S550 Mustang
Coolant Reservoir Cover.
FT 571 $295.00   $265.50 FT 595 $55.00   $49.50
FT 9215 - S550 Brake Cooling Ducts, Pair FT 9215 Kit FT 9255
S550 Front
Brake Cooling Ducts.
(Pair)
S550 Front Brake Cooling Duct Kit
with 10' long
neoprene hose.
S550 Front Brake Cooling Duct Kit
with 10' long
thermoplastic rubber hose.
FT 9215 $159.00   $143.10 FT 9215 Kit $295.00   $265.50 FT 9255 Kit $249.00   $224.10
FT 570 - S550 Diff Cooler Kit

 
S550
Differential Cooler Kit.
S550 Axle Tool
FT 570 $1,120.00   $1,008.00 FT 2210 $149.00  $126.65


FORD Focus RS Parts
30% off
FT 25950
Focus Front
Heavy Duty
End Link Kit.
FT 25950 $119.00   $83.30
 
FT 25030 - Focus RS Front Floating Rotor Set
Focus RS only.
2-piece Front Floating
Rotor Set.
FT 25030 $900.00   $630.00
FT 25040 - Focus Shifter Base Delrin Bushings FT 25045 - Focus Shifter Cable Bracket Aluminum Bushings
Focus Shifter Base
Delrin Bushings.
Focus Shifter Cable Bracket
Aluminum Bushings.
FT 25040 $41.95   $29.37 FT 25045 $31.95   $22.37

FORD Focus ST Parts
30% off
FT 25950
Focus Front
Heavy Duty
End Link Kit.
Focus Rear
End Link Kit.
FT 25950 $119.00   $83.30 FT 25090 $145.00   $101.50
 
FT 25040 - Focus Shifter Base Delrin Bushings FT 25045 - Focus Shifter Cable Bracket Aluminum Bushings
Focus Shifter Base
Delrin Bushings.
Focus Shifter Cable Bracket
Aluminum Bushings.
FT 25040 $41.95   $37.75 FT 25045 $31.95   $22.37

WARRANTY AND DISCLAIMER
WARRANTY AND DISCLAIMER: FULL TILT BOOGIE RACING, INC., A WISCONSIN CORPORATION (“SELLER”), HEREBY WARRANTS THAT THE ENCLOSED AUTOMOTIVE COMPONENTS ARE FREE FROM DEFECTS IN WORKMANSHIP AT THE TIME OF SHIPMENT, BUT DISCLAIMS AND EXCLUDES ANY AND ALL OTHER EXPRESSED OR IMPLIED WARRANTIES REGARDING THE ENCLOSED AUTOMOTIVE COMPONENTS. PURSUANT TO THE UNIFORM COMMERCIAL CODE, ARTICLE 2, SECTION 316, SELLER SPECIFICALLY EXCLUDES ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. SELLER DIRECTS PURCHASER TO FULLY INSPECT AND EXAMINE EACH ENCLOSED AUTOMOTIVE COMPONENT BEFORE INSTALLATION AND TO USE EACH AUTOMOTIVE COMPONENT AT PURCHASER’S OWN RISK. IN THE EVENT THAT ANY AUTOMOTIVE COMPONENT IS DEFECTIVE UPON PURCHASER’S RECEIPT, PURCHASER’S SOLE REMEDY SHALL BE TO RETURN THE DEFECTIVE AND UNUSED AUTOMOTIVE COMPONENT TO SELLER WITHIN FIFTEEN (15) DAYS AFTER PURCHASER’S RECEIPT AND REQUEST IN WRITING EITHER A FULL REFUND OR A REPLACEMENT, WHICH SELLER SHALL SHIP TO PURCHASER AT NO ADDITIONAL CHARGE.

Full Tilt Boogie Racing Inc........1817 Dolphin Drive.......Waukesha, WI 53186.........info@fulltiltboogieracing.com